Aluminum Alloy 1060 3003 Aluminum Coil Cladding with Polykraft Moisture Barrier

• Color: Silver
• Application: Transportation Tools, Pipeline Cladding
• Certification: RoHS, ISO9001, ASTM, JIS, GB, EN, ASTMB
• Technique: Cold Drawn
• Grade: 1060 3003
• Temper: O - H112
• Model NO.: 3003
• Surface Treatment: Color Coated
• Alloy: Alloy
• Width: 0.3m-1.2m
• Thick: 0.1mm-1.2mm
• Transport Package: Pallet Package
• Specification: 0.2mm - 1.5mm thick
• Trademark: ISOKING
• Origin: China
• HS Code: 7607200000
• Production Capacity: 5000 Tons Per Month

Product Description

 

Product Description

ISOKING ALUMINUM CLADDING INTRODUCTION

*Polykraft consists of one layer of one mil polyethylene film with a protective layer of 80g/m2-120g/m2 virgin kraft paper.
*The moisture barrier is factory applied by attaching the jacketing by continuous lamination to the full width of the metal.
*The moisture barrier is used to prevent moisture and corrosives in the insulation from coming into direct contact with the metal jacketing surface and causing galvanic or chemical corrosionPolykraft consists of one layer of one mil polyethylene

SPECIFICATION

A. Alloy Offered: AA 1XXX, AA 3XXX, AA 5XXX, AA 8XXX
B. Temper Offered: O, H12, H14, H16, H18, H26, H46
C. Chemical Composition: The material chemical composition is checked with spectrometer and complies to ASTM B 209M-14 STANDARDS and BS EN STANDARDS.
D. Mechanical Composition: The material mechanical composition is checked with tensile test machine and complies to ASTM B 209M-14 STANDARDS and BS EN STANDARDS.
E. Applicable Standards For MILL FINISH : ASTM B-209M-14 and BSEN For COATED SHEET : ECCA/ASTM

Alloy	Si	Fe	Cu	Mn	Mg	Zn	Ti	Others	Al
3003	0.6	0.7	0.05-0.20	1.0-1.5	-	0.10	-	0.2	remainder
1060	0.25	0.35	0.05	0.03	0.03	0.05	0.03	0.03	99.6

3003 SERIES

ISOKING ALUMINUM CLADDING

1060 SERIES

ISOKING ALUMINUM CLADDING

INTRODUCTION

This is a very popular finish and is the "default" for the many end users/specifiers who prefer the clean look of this finish. This finish sheds rain water the best. However, this smooth surface readily shows damage such as from hail or other physical abuse. It also shows the dirt more than the other finishes due to its smoothness. Lastly, it is highly reflective of sunlight and when located near roadways, some specifiers see this reflection as a possible safety hazard.

INTRODUCTION:

This is another popular finish used for aluminum jacketing. The stucco-like surface texture hides. small imperfections and scratches caused by physical damage during or after installation. This finish also reduces reflectivity while still looking very professional. Lastly, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.

SPECIFICATIONS:
CORRUGATED (CROSS-CRIMPED) SURFACE FINISH
There are four corrugations available. The following drawings are measured in millimeter.
Type V4.8 ( 3/16"), Type V32 (1-1/4"), Type V65 ( 2-1/2") Type 820 ( box ribbed).

 

Type	Length (m)	THK (mm)	Covering width (mm)	Alloy No. Alloy No.	Surface finish	PFMB
V4.8	20-30	0.4-1.0	1000	1060/3003	Smooth/embossed	PSMB / PKMB
V32	2-4	0.4-1.0	940	1060 /3003	Smooth/embossed	PSMB / PKMB
V65	2-4	0.4-1.0	900	1060/3003	Smooth/embossed	PSMB / PKMB
820	2-4	0.4-1.0	820	1060 /3003	Smooth/embossed	PSMB / PKMB

ISOKING ALUMINUM CLADDING SERIES PRODUCTION:

ISOKING ALUMINUM CLADDING

ISOKING ALUMINUM CLADDING WAREHOUSE

ISOKING Aluminum Cladding