| Customization: | Available |
|---|---|
| Type: | Electroslag |
| Control Mode: | Manual |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Wire electroslag welding machine is an electroslag welding equipment that uses welding wire as electrode, and the wire is fed into the slag pool through reusable slag, welding torch and conductive nozzle. It is mainly used for efficient welding of vertical welds in steel structures, especially for welding of box-type columns and box-type beam bulkheads. It can weld very thick workpieces at one time, with high welding speed, smooth welding process and not easy to produce spatter, with high deposition rate.
1. Thickness of steel plate: 16-100mm
2. Steel type: low carbon steel, low alloy steel, medium carbon steel, refractory steel, etc.
3. Length of welded seam: Maximum 1680mm
4. Welded seam structure: T-shaped weld and butt weld
1. Low welding cost because only wire is used as filler material.
2. due to the use of fine wire, high current density so that the deposition rate of up to 140g/min, and the weld seam a molding, and thus high welding efficiency.
3. The application of oscillator makes the maximum thickness of single wire weldable plate up to 100mm (other manufacturers can weld plate thickness range is only 16~65mm).
4. easy to operate, slag welding gun according to the preset current automatically raised, so an operator can control more than two machines at the same time.
5. Extremely low equipment maintenance and repair costs. Adopting cost-effective and highly reliable components that can be provided in large quantities on the market to minimize the end-use cost of the user.
6. Specially designed welding current detection and control system has anti-vibration, high precision and high reliability because it is independent of the ammeter pointer (unlike the Watanabe Watanabe meter used in other welding machine factories, which depends on the action of the ammeter pointer).
7. With slow wire feeding arc and arc chipping melting ball (FTT) function, so that the arc is more reliable, and eliminates the need to cut the welding wire end of the melting ball after welding process.
8. With motor overload and short-circuit protection function, can avoid motor blocking and short-circuit damage to the components.
9. With three-coordinate (ZHS) or two-coordinate (ZHS (L)) position adjustment, horizontal rotation, cross-direction tilt angle adjustment and wire cross straightening function, you can conveniently adjust the position and angle of electroslag welding gun, so that the end of the wire in the direction of the gun axis.
10. With welding cart walking lock interface, can be connected with the cart control system, to avoid welding due to misuse of the cart movement.
11. With cooling water abnormal alarm protection function, when the circulating cooling water tank is not open or the cooling water flow is significantly reduced, broken or blocked, the sound and light alarm to the user, while automatically stopping the welding process to avoid damage to the welding torch and water-cooled cables due to overheating.
12. For site conditions are limited or special size construction and development. Can be easily moved, occupying a small site characteristics.
| Trolley for fusion nozzle slag welding | |
| Description | Parameter |
| Capacity of Wire Plate | 25Kg |
| Range of Machine Head Rotating Degree | ±45° |
| Range of Welding Gun Rotating Degree | ±45° |
| Range of Crossbar Rotating Degree | 360° |
| Weight (Welding wire not included) | 50Kg |
| Rated Welding Current | 1250A |
| Column lateral adjustment stroke | 78mm |
| Vertical Head Adjustment Stroke | 100mm |
| Head lateral adjustment stroke | 100mm |
| Crossbeam lift stroke | 170mm |
| Welding Wire diameter | 2/2.4/3.2mm |
| Welding Wire Feeding Speed | 0.4~7.2m per minute |
| Frame Size (L*W*H) | 962*425*976mm |
){kind=link}